Opening hours
It is possible to display the opening hours and closing days of a library via a rest API, for example on the library's website. Two tabs are available for this: opening hours and closing days
Note: The opening hours set here do not influence the operation of Wise, they are for website reference only.
Opening hours tab
This table shows the opening hours and the order in which they should be displayed by means of the serial number (per day).
At the top, select the location for which you want to enter the times. Add an opening time by clicking on New at the bottom of the screen.
| Field | Description |
|---|---|
| Day | Choose the desired day from the drop-down menu. |
| Volume/Issue | If you have different "blocks" of opening times per day (for example, closed at noon), you can indicate this here, per day, in which order they should be displayed. If you only have one block, you can leave it blank. |
| From | Choose the desired start time |
| Until | Choose the desired end time |
| Staffed/Unstaffed | Make a selection to indicate whether a branch is staffed or unstaffed. |
| Text | If applicable, a text can be entered here if, for example, the library is open at a certain time but without staff. |
You can delete rules by selecting the relevant rule and then clicking “Delete” at the bottom
To change an existing rule, select the rule and open it by double-clicking with the mouse. You can then make and save the changes.
Closing days tab
In this table, you can indicate when the library is closed.
Use the Select branch drop-down menu at the top left of the screen to select the branch/location to be edited. Click New at the bottom of the screen to add another day.
| Field | Description |
|---|---|
| Date | Enter the date here (DD-MM-YYYY) or choose a date from the calendar by clicking on the dots |
| Text |
State the reason for closing here. |
You can delete rules by selecting the relevant rule and then clicking “Delete” at the bottom
To change an existing rule, select the rule and open it by double-clicking with the mouse. You can then make and save the changes.